Bullet Resistance Products
| UL 752 - Level 1 | UL 752 - Level 2 | UL 752 - Level 3 | |
| Ammunition | 9mm full metal copper jacket with lead core | .357 Magnum jacketed lead soft point | .44 Magnum lead semi-wad cutter gas checked |
| Grain | 124 | 124 | 158 |
| Grams | 8.0 | 10.2 | 15.6 |
| Minimum Velocity | 1,175 fps | 1,250 fps | 1,350 fps |
| Maximum Velocity | 1,293 fps | 1,375 fps | 1,485 fps |
| Single Sizes | min: 2'-0" x 2'-0" max: 4'-0" x 8'-0" |
||
| Pair Sizes | min: 4'-0" x 2'-0" max: 8'-0" x 8'-0" |
||
| Door Gauge | 16 Gauge (0.053 min) 14 Gauge (0.067 min) |
16 Gauge (0.053 min) 14 Gauge (0.067 min) |
16 Gauge (0.053 min) 14 Gauge (0.067 min) |
| Material Types |
Cold Rolled Steel (ASTM A1008) |
||
| Glazing Options | Available See Note Below | ||
| Door Thickness | 1 3/4" (+/- 1/16") | ||
| Frame Gauge | 16 Gauge (0.053 min) 14 Gauge (0.067 min) |
14 Gauge (0.067 min) | 14 Gauge (0.067 min) |
| Frame Depth | 4 1/2" min - 15" max | ||
| Jamb Face | 2" Face | ||
| Header Face | 2" min, 4" max | ||
| Corner Construction | Continuous/Full Profile Weld | ||
| Fire Rating | up to 3 hours | ||
* Glazing Notes: Bullet Rated Light Kit and Glass Required By Others. Min 12" x 12", Max per Kit and Glass Listings
General Construction
- Edge Type Options
- Bevel Hinge & Lock Edge 1/8" over 2" (standard)
- Square Edge
- Edge Seam Options
- Seamless - Bondo (Standard) - ANSI A250.8/SDI 100 Model 2
- Seamless - Continuous Welded (Optional) - ANSI A250.8/SDI 100 Model 2
- Open Seam (Optional) - ANSI A250.8/SDI 100 Model 1
- Top Channel
- 16 Gauge (0.053 min)
- Inverted (standard), Flush (optional), Water Tight Seal (optional)
- Projection Welded
- Bottom Channel
- 16 Gauge (0.053 min)
- Inverted (standard), Flush (optional)
- Projection Welded
- Weep Hole Provided
- Reinforcements
- Hinge - 7 Gauge (0.167 min)
- Cylindrical Lock (Govt. 161) - 16 Gauge (0.053 min)
- Mortise Lock (Govt. 86) - 11 Gauge (0.108 min)
- Flush Bolts - 11 Gauge (0.108 min)
- Surface Bolts - 14 Gauge (0.067 min)
- Surface Closer - 14 Gauge (0.067 min)
- Surface Holder/Stop - 14 Gauge (0.067 min)
- Pull Plates/Bars - 14 Gauge (0.067 min)
- Surface Applied Exit Devices - 14 Gauge (0.067 min)
- Pivots - 7 Gauge (0.167 min)
